EnclosuresLoudspeakersHornsElectronics  
l
   
The CompanyServicesProductsCatalogueInstallationsContact usDistributors
 
TR-AMP 3000 DLS  
     
The TR Digital Audio Amplifiers use class D technology that reduces energy loss and therefore increases its performance. In fact, only 10% of the generated power will be lost as heat, leaving 90% of the energy to be delivered to the speakers. Besides a higher efficiency, this system will maintain a low temperature inside the amplifier.
 
DESCRIPTIVE DATA
Power ratings 2Ω 1500 W RMS per channel
Power ratings 4Ω 1500 W RMS per channel
Power ratings 8Ω 750 W RMS per channel

Frequency response

 0,-0.5db 30-20 000Hz @ 1W RMS / 4Ω
  +0,-0.5db 30-20 000Hz @ 1500W RMS / 4Ω
Total harmonic distortion Less than 0.1% @ 1500 W RMS per channel
  into 4Ω, max 2%, distortion limiter active
Transient intermodulation distortion None (0%) due to the nature of the circuits
Output slew rate Internally controlled, no slew rate limit
Hum et noise < 105db below full power, from 20-20 000 Hz
Input sensitivity 26db for full power into 4 or 8Ω
Load protection DC protection from input to output, load
  mismatch, accidental short circuit, limiter
Load impedance 2 Ω per channel, current limited by muting at 55 A
Limiter 2 levels (-2db and 2% max. distortion)
Power consumption 1350 W max at 4Ω at 1/3 power/channel
Front panel indicator Enable, Limiter, Thermal, Protect, PowerDrop
Efficiency Minimum of 92% at full power
Mode of operation for power supply Switch mode resonant PWM at 62.5 Khz,
  4 KW per channel, 250 Khz PWM amplifier
Cooling

7 fans and small aluminium heat sink
 
Belisle Acoustics Inc. pursues an active Research & Development program and reserves the right to alter specifications without prior notice.
lThe CompanylServiceslProductslCataloguelInstallationslContact uslDistributorsl
© Belisle Acoustics Laboratories 2000-2006 - Designed by Julie Hamilton
Flash plugin is needed for this site