The TR Digital Audio Amplifiers use class D technology that reduces energy loss and therefore increases its performance. In fact, only 10% of the generated power will be lost as heat, leaving 90% of the energy to be delivered to the speakers. Besides a higher efficiency, this system will maintain a low temperature inside the amplifier.

The professional TR-P4800 ampli-fier will give accurate and uncolored sound with a very low distortion level. It also features Bridge, Stereo and Parallel modes, advanced protection circuitry guards, massive heat-sinking and Grounded Output topology to maintain low tempe-rature operating conditions without restricting the output power and some fully independant power supplies with respective transfor-mers, rectifiers and reservoir capacitors.

The TR-P5800 features a three-mode switch that allows amplifier settings that will best suit even the most demanding sound professio-nals’ needs. Its fully independant power supplies have separate power transformers, rectifiers and reservoir capacitors which gua-rantee sustained high current flow. The TR-P5800 will give a powerful and reliable performance.

This last version of the TR Professional Power Amplifier Series assures accurate and uncolored sound with low distortion. Its Bridge / Stereo / Parallel switch allows customized settings, its protection guards prevent shorted output, general overheating, unwanted DC, ON/OFF transient electrical spikes and MAINS induced interference, its heat-sinking device maintains inter-nal low teperatures and its indepen-dant power supplies guarantee sustained high current flow. Giving a powerful, reliable performance, this amp will work for the most de-manding professional high power applications.

Text coming soon.

4 inputs and 8 outputs coupled with an easy user interface, the TR 408D Digital Crossover/System Processor has all the audio processing tools needed for precise crossover and sound control. Each input allows gain and delay control, six parame-tric, low or high shelf filters. In addition to setting crossover fre-quencies, each output may be assi-gned to any one or a combination of inputs, allowing programing of four parametric, low or high shelf filters, delay for time delay adjustments, output gain, reverse polarity and a compressor/limiter for speaker protection.

The TR-3060 is a cost efficient 3 input - 6 output digital loudspeaker management system. It is used with 32-bit (40-bit extended) floating point processors and high performance 24-bit Analog Converters. The high-bit DSP prevents noise and distortion. A complete set of parameters include I/O levels, delay, polarity, 6 bands of parametric EQ per channel, multiple crossover selections and full function limiters. Precise frequency control is achieved with its 1 Hz resolution. Inputs and outputs can be routed in multiple configuration to meet any requirements.

The TR ALMS is a 2 channel stereo 3/4 ways mono sound processor with integrated limiters functioning as crossover filters. Phase alignment and an output limiter in standard mode.

The TR 4080D is a 4 input - 8 output digital loudspeaker management system. It has 32-bit (40-bit extended) floating point processors and high performance 24-bit Analog Converters and its high-bit DSP prevents noise and distortion. A complete set of parameters include I/O levels, delay, polarity, 6 bands of parametric EQ per channel, multiple crossover selections and full function limiters. Precise frequency control is achieved with its 1 Hz resolution. Inputs and outputs can be routed in multiple configuration to meet any requirements.