EnclosuresLoudspeakersHornsElectronics  
l
   
The CompanyServicesProductsCatalogueInstallationsContact usDistributors
 
TR P3800  
     
The TR-P3800 from TransparenceTM amplifiers is a tool designed for professional use. It generates accurate and uncolored sound with very low distortion and features a three-mode switch, protection guards against shorted output, general overheating, unwanted DC, ON/OFF transient electrical spikes and MAINS induced interference, a heat-sinking device and independant power supplies. This amp will work for the most demanding professional high power applications.
 
DESCRIPTIVE DATA
Weight 32 lbs
Dimension (WxHxD) 482 mm x 88 mm (2U) x 450 mm
Power (RMS) 8Ω 520W x 2
Power (RMS) 4Ω 800W x 2
Power (RMS) 2Ω 1050W x 2
Bridged Power (RMS) 8Ω 1600W
Bridged Power (RMS) 4Ω 2100W
THD+N (below rated power, 1kHz) < 0.05%
IMD SMPTE at 100W < 0.05%
Frequency response 20 Hz -20 kHz, +0, -0.3 dB at 1W
Damping factor > 600
Input sensitivity Rated power, 0.775 V RMS/1.1 V RMS
  or 26 dB (selector)
Input impedance 20 kOhms balanced, 10 kOhms unbalanced
Signal to noise ratio (A-weighted) > 100 dB
Crosstalk > 60 dB
Input connectors Two Canon connectors
Output connectors Speakon, speaker cables terminal
Cooling Two proportional speed DC fans

Gain control

 2 x 41 step trimming
Indicator LED indicator, including power, bridge,
  parallel, signal, limiter and protect
Protecting circuitry

Temperature, DC output, shorted, turn on/off
 
Belisle Acoustics Inc. pursues an active Research & Development program and reserves the right to alter specifications without prior notice.
lThe CompanylServiceslProductslCataloguelInstallationslContact uslDistributorsl
© Belisle Acoustics Laboratories 2000-2006 - Designed by Julie Hamilton
Flash plugin is needed for this site