EnclosuresLoudspeakersHornsElectronics  
l
   
The CompanyServicesProductsCatalogueInstallationsContact usDistributors
 
TR P4800  
     
The professional TR-P4800 amplifier will give accurate and uncolored sound with a very low distortion level. It also features Bridge, Stereo and Parallel modes, advanced protection circuitry guards, massive heat-sinking and Grounded Output topology to maintain low temperature operating conditions without restricting the output power and some fully independant power supplies with respective transformers, rectifiers and reservoir capacitors.
 
DESCRIPTIVE DATA
Weight 34 lbs
Dimension (WxHxD) 482 mm x 132 mm (3U) x 485 mm
Power (RMS) 8Ω 850W x 2
Power (RMS) 4Ω 1200W x 2
Power (RMS) 2Ω 1700W x 2
Bridged Power (RMS) 8Ω 2400W
Bridged Power (RMS) 4Ω 3400W
THD+N (below rated power, 1kHz) < 0.05%
IMD SMPTE at 100W < 0.05%
Frequency response 20 Hz -20 kHz, +0, -0.3 dB at 1W
Damping factor > 600
Input sensitivity Rated power, 0.775 V RMS/1.1 V RMS
  or 26 dB (selector)
Input impedance 20 kOhms balanced, 10 kOhms unbalanced
Signal to noise ratio (A-weighted) > 100 dB
Crosstalk > 60 dB
Input connectors Two Canon connectors
Output connectors Speakon, speaker cables terminal
Cooling Two proportional speed DC fans

Gain control

 2 x 41 step trimming
Indicator LED indicator, including power, bridge,
  parallel, signal, limiter and protect
Protecting circuitry

Temperature, DC output, shorted, turn on/off
 
Belisle Acoustics Inc. pursues an active Research & Development program and reserves the right to alter specifications without prior notice.
lThe CompanylServiceslProductslCataloguelInstallationslContact uslDistributorsl
© Belisle Acoustics Laboratories 2000-2006 - Designed by Julie Hamilton
Flash plugin is needed for this site